Progressive Controllers and Displays > IGT Stand-alone Progressive Systems

Igt 2000 red white blue 3 coin questions

(1/3) > >>

Dpickl01:
I picked up a igt 2000 red white and blue slot it had error 12 so I bought a solder replacement battery holder off ebay and the Epsom chips to reset and clear the board. I got it up and running but wanted to see if I can reprogram it to accept more than 3 coins at a time. I don't have a bill validation and can only put 3 coins in at a time. I appreciate the help.

Also the dip switches what's a standard for them? I have progressive off and max pay 300

sixcardmark:
--------------------------------------This topic needs moved to S+ section.-------------------------------------------------- 


Normally 1-3 ON and the rest OFF.  Yes there is a special SP chip that will allow for accepting more than the 3 game play coins.  Can you post a pic of machine with the door open? You may have an S machine which may not support what you want to do.

Dpickl01:
Pics should be up now I bought this chip set to clear the memory

Not sure what the little one is for?





https://ibb.co/rc0F2px
https://ibb.co/wKXP4ZY
https://ibb.co/c1n2Qy8

sixcardmark:
You have an S+ machine.  SP738 should allow you to insert more than 3 coins at a time so you can add credits.  Also, there was no need to use the clear chip after changing the battery.

Stayouttadabunker:
In your 2nd photo, apply a small piece of tape over the glass that's on top of the REEL prom chip.
The tape will help the chip retains it's programming.

The small 8-pin chip you have in your hand, is a 24c04 DIP chip for replacement chip on the board that's on the floor under the MPU called the motherboard.
You do not need to change it right now...or maybe ever.

Below is the uncovered glass on your Reel prom chip...>>>

Navigation

[0] Message Index

[#] Next page