**Reel Slots** Gaming Machines > Bally Alpha Reel Games
GEN2 Printer error
yamakasi08:
hello, I have a problem with an installed GEN2 printer in a slot Bally Alpha s9000 . the problem "printer open" of the menu system is not cleared . and when I open the printer gives me the error duplicate. images below to see what I'm talking about.
apologize for my English : D
rickhunter:
you have another printer to try?
yamakasi08:
yes i have, but this on another machine.
unfortunately I have one that on me, and since that's always a machine is out of service.
need to resolve the problem to re-enable the slot.
-if I put another printer, the error is cleared. but I transfer the error in the slot to put the printer.
rickhunter:
Then you have a bad printer. There's a chance your firmware may have bad, do you have the necessary equipment to flash the printer to the correct firmware? If you don't I'm afraid your only solution is just acquire another printer. I don't know where you are in the world, but here in the states, you can buy those printers used and working for around $50-$60.
yamakasi08:
im from argentina, i dont have the equipement you mention.
and subject to the dollar here is very difficult to get imported stuff XD.
well ty for the info. 'll see what more can be done.
if I come up with some solution, I will post it.
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |