TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories > Player Tracking Systems
Looking for pinout and voltage for a Bally Player tracking panel
stoosh:
--- Quote from: marcdavis on October 24, 2022, 05:46:19 PM ---Hi - You can do more than just make them light up - The Arduino TITO and Player Tracking Project: https://github.com/marcrdavis/ArduinoTITO-PlayerTracking
--- End quote ---
Thank you for the reply, I should have been a little more specific. I have this mounted in my IGT game king to fill the space where an ugly blank usually is. All I am looking to do is find out what voltage lights it up and what pins need that voltage applied to them. I don't have a Bally machine and looking up this Mastercom 250 is $125 on ebay for a beat up thing. That's more than I'm looking to spend just to light it up.
marcdavis:
Hi - the project doesn't use the Mastercom; it allows you to use a small Arduino device to power the display, keypad and card reader to make them functional. You'll be able to set a custom message on the display and do some cool things with the machine; ticket in-ticket out; remote control of the game king via a web browser; use player tracking cards for added realism. If you want to go down that road.
stoosh:
--- Quote from: marcdavis on October 24, 2022, 06:45:30 PM ---Hi - the project doesn't use the Mastercom; it allows you to use a small Arduino device to power the display, keypad and card reader to make them functional. You'll be able to set a custom message on the display and do some cool things with the machine; ticket in-ticket out; remote control of the game king via a web browser; use player tracking cards for added realism. If you want to go down that road.
--- End quote ---
Cool! I may or may not have been able to program some sat cards back in the 90's :yes: so I have some experience manipulating things, but not sure if I can follow those instructions well enough to even identify what devices I have here. None of the model numbers mentioned in the pin outs match anything I have. I will study it some more, but it maybe over this old mans head. I have Titos on all my machines, but making the display say cool things would be pretty awesome.
marcdavis:
If you can send me the model numbers for your keypad/display/reader I'll look up the data sheets to see if they can be made compatible. It is usually just different pinouts.
Navigation
[0] Message Index
[*] Previous page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |