Bill Validators and Currency acceptors > MEI Mars Bill Validators

MEI Cashbox hinge pin removal


I have a few bench test machines that can use MEI bill validators and their respective grey plastic cashboxes.
Often, I find myself testing with a one dollar bill to see if the BV or printer is working or not.
Sometimes I play with a twenty or tickets over and over and have to pull the ticket or bill outta the cashbox.
With the BV on the bench and not in a cabinet, the BV housing and head is just sitting there on top of the cashbox.
I have to pull out the cashbox and lay down the BV housing with the head in order to pull out the bills or tickets from the cashbox.

What I want to do is remove the cashbox door so I can just pull out the ticket or bills with one hand from the exposed bottom.
I'd like to mount the BV housing to the wall next to the button deck.
Looking at an MEI plastic cashbox door hinge, does anyone know how that hinge pin comes out? :Scratch-Head:
I'm sure someone has removed one before?
I don't want to ruin it in case I need it in the future.

Here's a picture or two of the hinge pin.
Click on any photo below to enlarge if needed...>>>


[0] Message Index

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
Go to full version