**Video Poker, Keno, Slots, 21** Gaming machines > IGT AVP (Including G20,G23)
Copy AVP hard drive?
RayV:
Ok so I broke down and got an Ekey7 and diagnostic from RB for my AVP after I got a “No game enabled” error.
I have been plagued with random reboots while the machine is idling and “presentation manager” errors almost since I’ve had this machine.
I got the Ekey yesterday and got it up and running again but I am still having these reboots out of the blue and usually it shows this error after the reboot.
Some people are telling me it could be the hard drive
The guy I got this machine from put a new HP 250GB SSD drive in it and my question is, can these drives be copied easily?
I just want to try a new drive to see if that solves the problem but I do not have any of the game files to reload
Yoeddy1:
Whenever I hear about random reboots, I tend to lean more towards the power supply or even the ribbon cable that connects to the CPU. Have you reseated those?
Thanks,
Jason
RayV:
--- Quote from: Yoeddy1 on March 03, 2023, 07:52:16 AM ---Whenever I hear about random reboots, I tend to lean more towards the power supply or even the ribbon cable that connects to the CPU. Have you reseated those?
Thanks,
Jason
--- End quote ---
Yes
I pulled the box out last night to inspect the inside.
I made sure all the cables were good and tight.
I let it sit idling and after about 30 minutes it rebooted with that error.
Stayouttadabunker:
Can I ask Yoeddy1, what size SSD's are you using on your machine?
I wonder if the AVP's have some sort of drive size limits?
Anyways, Googling gave me a suggestion to look at...>>>
"We got it. It was a lil gremlin in the printer harness. Last night before i left i remembered that Pot 'O Golds will go in to a presentation error because something happened with the printer. I had my guys swap full printer assemblies with the next machine and it works fine now. In fact, so does the one they swapped it with. My guess is that some pins in the harness are getting loose and were tightened up (for the time being) when we swapped harnesses."
Maybe if you don't have another printer harness to try, how about disconnecting and re-connecting the printer harness a few times to try to get a better pin contact?
RayV:
--- Quote from: Stayouttadabunker on March 03, 2023, 08:15:25 AM ---Can I ask Yoeddy1, what size SSD's are you using on your machine?
I wonder if the AVP's have some sort of drive size limits?
Anyways, Googling gave me a suggestion to look at...>>>
"We got it. It was a lil gremlin in the printer harness. Last night before i left i remembered that Pot 'O Golds will go in to a presentation error because something happened with the printer. I had my guys swap full printer assemblies with the next machine and it works fine now. In fact, so does the one they swapped it with. My guess is that some pins in the harness are getting loose and were tightened up (for the time being) when we swapped harnesses."
Maybe if you don't have another printer harness to try, how about disconnecting and re-connecting the printer harness a few times to try to get a better pin contact?
--- End quote ---
Yes I can try that.
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |