**Reel Slots** Gaming Machines > IGT S and S-plus Reel Games

IGT s+ Payout question

<< < (4/4)

jay:
What game chip do you have.

mikesauto:
SP831

jay:
The type of Game Chips you have determine what options you have.
Ie some game chips have separate hopper and credit limits while others only have 1 limit, and when reached it goes to hand pay.
You use the white test button to get to the correct menu then change the options with the reset key, or spin buttons etc.
This varies between game chips.

Each game chip has a document called a PSR - Program Summary Report that details what these options are.
A similar document is available called a PAR sheet - Paytable and Reel that describes the reel chip behavior in your machine.

I have attached two files. The first is the PSR that's specific to your game chip. These are not the easiest things to read if you have not gone through this before.
Next is a simplified sheet that walks you through changing all the settings - we have documented many of the common chips (yours is not that common) but if you have these two documents printed and side by side it becomes fairly easy on what to change and how.

If you become a contributing member you would have access to our downloads folder where all these nuggets of gold are kept.

mikesauto:
Can someone explain this a little? I'm a mechanic and we have self diagnostics and recoding on cars I've done for yrs ,this seems about the same

jay:
According to the PSR
Pressing the self test switch or the Bet One Credit player switch “pages” forward through the self test mode, and pressing the Play Max Credits player switch pages backward.  Changes or selections in the options pages may be made by pressing the Change switch or turning the jackpot reset key.  During a tilt condition, only the WAMM/CCOM machine address may be selected or altered.  The numbers appearing below enclosed in < > represent the self test page number, [ ] represent the option number, and { } represent the setting.  The self test pages appear in the following order:



Credit Limit   Automatically matches the maximum hopper setting that can be set by DIP switch or in the self test mode.  If the SAS EFT option is selected, the maximum limit cannot exceed 9,999.

SO knowing that the Credit limit is tied to the hopper - we need to look at the Max Hopper Pay.

Max Hopper Pay <7>   Programmable only if DIP switches 1 and 2 are set for self test selection (on position); otherwise, this page is for display purposes only.  Determines the maximum number of coins that may be paid out of the hopper

So based on the Max hopper pay instructions - you need to pull your MPU, and set the dip switches. Generally there is a sticker on the tray that also has the designation of each of the dip switches.

Next

According to the Simplified sheets you would press the white test button 13 times, until you see a 7 in the coins played. Then you use the reset key to change the number to 9999.

Once this is done - press the self test button to move to another page (this locks in the setting you just made). Close the door.

Navigation

[0] Message Index

[*] Previous page