**Reel Slots** Gaming Machines > IGT Reel Touch Games

S2000 Reel Touch MSVerify

<< < (2/5) > >>

Thehawk07:
After about 15 to 20min the bottom says display passes self test.

Thehawk07:
After about 30 to 40 min it tried to reboot. Going through bios and same process as stated before.

qbert:
I need more details on top box sequence.
Post a photo of the screen that says please wait
There is something wrong with the top box.
What does the initial splash screen say on the top box.
Do you have a red white and blue finger splash or green and yellow energy star?
How many different blue screens.
I need step by step I can't see the machine booting you must give more detail.

Thehawk07:
First screen shows the red white and blue with the finger
Then goes to the bios
As it’s going through the bios the bottom says waiting for video display
Screen goes black for about 5 to 7 min.
Then blue screen that says IGT reel touch, one moment please.
Bottom says waiting for the video display while this screen is already on.
5min Peter the top screen still the same and bottom displays msverify comm error
10 to 15min later bottom says display passes self test. It stays this way for about 25min and then the top tries the reboot going through this process again.

qbert:
OK good description.
You have a bios 1 machine based on rwb finger splash.
From this point don't worry about the bottom VFD
because we have disconnected its ability to get information from the top box when we unplugged the gray wired molex plug. As long as it is getting to waiting for video display it is working.
My initial analysis is either the harddrive has failed or there are other problems in the top box.
I will need some pictures.  There is a size limit that you can post here, you usually must reduce them before you can post them.
Open the top box take a picture of the board. Look for bulging capacitors on the board.
Turn the machine on, verify that the cooling fan mounted to the cpu heat sink is operating and not full of dirt. Be careful the fan blades are fragile.
I also need to know the theme of this machine along with any information printed on the hard drive.
Warning, you have a bios 1 type reel touch do not try and view the information on the harddrive with another computer, doing this will destroy the harddrive if it's not bad already.
Eventually I will need to know from the lower mpu the chip numbers for the SG, SB, and VS chips.
Also is it a 500 series or enhanced mpu board.

Navigation

[0] Message Index

[#] Next page

[*] Previous page