**Video Poker, Keno, Slots, 21** Gaming machines > IGT Fortune 1 Sircoma/Poker

1981 igt fortune 1 draw poker /klar fixed my board

(1/5) > >>

freddie200:
hey guys hopeing to get some info on this machine  ,,,,,,,not sure of call letters pe - pe +  / did the normal usaual   pulled all jacks and cleaned
blew out what little dust it had in it
orderd and installed new battery

turned on -- screen came on and  said game over and looked good then lettering got jumbled and tured into f-s in alot of places on screen,,,,,pic 1

not sure of where the reset switch should be for normal game play,,,, pic 2

not sure if the dip switches are in right places ,,,pic 3

hopeing some had or knows a a little about this onecant find this exact machine in any of the treads i looked at here  any help would be nice

Badbaud:
That is a IGT Fortune one.
Step one would be to remove all socketed chips, clean their legs with a pencil eraser and reinsert.

freddie200:
thank u /////didnt know that was a thing ,,learn something new every time i get on here thanx freddie

freddie200:
cleaned all legs of removible chips ..inspected board looking for burns or cracks dont see any thing obivaus

cant seem to get screen to diplay right

i guess next step ,,is to replace the chips

anybody know who has copies ?

for the igt fortune 1 draw poker silver city 5 coin

thanx freddie

Badbaud:
Those are very old TMS 2716 EPROM's. They operate with +5V, -5V, and+12V and take a special programmer.
Today's programmers don't have that feature.
Normally they don't cause the scrambled video.
The first suspect is the 5101 RAM chip, remove it and install a socket for the replacement.
The next would be the video RAM's. 2114 or 2102 depending on the board design.
You will need a fast O-scope and some schematics to troubleshoot further.

Navigation

[0] Message Index

[#] Next page