Bill Validators, Currency Acceptors and Printers > JCM DBV-45, DBV-145, and DBV-200 Bill Validators

JCM DBV-45 & DBV-145 power and data connectors

(1/2) > >>

Winslow:
Hi !

I just recently picked up two DBV-45's and two DBV-145's that are still in original boxes as part of a package deal but they didn't come with any power or data cables. It looks like the power/pulse connector is a 6 pin connector and there is a 14 pin connector that needs to have a jumper between pins 7 and 10.

I plan on using these in a few different arcade video games and would be using the 4 pulses per dollar setting. I'm assuming that these will work fine for this ?

I would need to build some harnesses that will interface with these DBV's. Does anyone have part numbers for these connectors? I think I remember seeing pictures of them online they lock into place and have a small push-button on one side of the connector to release it.

If not, does anyone have a source for where these harnesses can be bought?

The JCM manuals that came with these show the 6 pin connector as Part # J91017 and the 14 pin connector as Part # J91016. I'm assuming these are JCM part numbers because I haven't had much luck searching those part numbers on Google or Mouser. Does anyone have a cross reference number for these OEM part numbers?

Any help you can provide would be greatly appreciated.

Steve

Winslow:
Here's a picture of the connections on the side of the DBV that I need connectors for.  Anyone got a source for these connectors or pre-made wiring harnesses?

Badbaud:
The 6 pin is power for the 145 head, just plug it in, no special harness needed.
The larger connector normally is only used to light up the insert bill bezel.
The side, long, small brown connector connects to the bill transport behind the head.
12 pin ones are usually IGT and has a standard DBV transport behind the head, again no special harness is required.
The 11 pin version uses a longer bill transport for Sigma and Bally games, no harness here either.

Winslow:
These are the connectors that I need. They are typically found in slot machines to connect to the DBV. Where can I buy these?

Badbaud:
Buy a DBV power supply and the 6 pin plug comes attached to it.

Navigation

[0] Message Index

[#] Next page