**Reel Slots** Gaming Machines > **Reel Gaming Machines** **General Chat**

What slot is this??

(1/3) > >>

mrcrazy:
Just picked it up, has some acid damage on the cpu board... has a cage at the bottom with 2 boards in it... need some schematics & ANY info..what model is this..it says IGT & aristocrat on it??

any info is appreciated! Thanks in advance!

Greg

Takaraz:
Hi
[size=78%]I have recently picked up a machine similar to that one. I don't have the arm fitted to the side instead there is a button below the reels. Mine is an original aristocrat from Australia not an IGT re badged models. But the photos looks the same internally[/size]
[/size]
[/size][size=78%]The machine is an esprit. There has been a few posts from Op-Bell that should help with diagrams[/size]
[/size]
[/size]Good luck with with it all[size=78%]

Op-Bell:
Oh no - not another Esprit.

Just kidding. This is an Aristocrat Esprit, imported from Australia to the US by IGT during the years its agreement with Bally prevented IGT from making any reel slot games of its own. It is the exact same model I fixed up a few years ago that somehow convinced people I'm the foremost Esprit expert in the world.

There are no schematics, I wasn't diligent enough to trace out the boards, but I have a manual on PDF. The wiring diagrams list what port pin on the 6821 PIAs they go to. "Logic" means a direct connection, "24VAC" means there's a triac in between. Please remember that the cabinet is not at logic ground, it's at about +20V relative to the circuit board ground, and careless probing can let the smoke out.

Main manual
Wiring Diagrams
Mechanical Drawings
Program Disassembly

Takaraz:
Greg.


Mine looks like this.


Externally your machine is a lot cleaner than mine.  :hissyfit:

Takaraz:
My IO board and processor board.


Excuse the diodes on the processor board.


Sloppy home made resistor network in RN12 on IO board but it does the job.

Navigation

[0] Message Index

[#] Next page