**Reel Slots** Gaming Machines > SIGMA Reel Games

Sigma Mech 3 reel "Over Paid" error message

(1/3) > >>

jont56:
Sigma Mech 3 reel "Over Paid" error message.
I also am in need of this manual. 

shortrackskater:
The original poster had not been on the forum for 5 years.
Two of the members who replied have passed away.
One member retired.
Have you tried this link that was mentioned? You might want to e mail and ask about that model It may go by another name.
https://www.coinslots.com/manuals/sigma/


There are members (such as Chris in the reply below) that can chime in and help you out. Most manuals aren't all that user friendly as they're designed for technicians, not a home user.

Chris-socal:
Good suggestion for manuals Shortrackskater I have downloaded manuals from there before with moderate luck getting the information I needed, simply because most manuals don't cover technical troubleshooting. But they were a good source.
I'm curious what information jont56 is looking for.  There are a few of us who have worked on Sigma 3-reels and they usually have common symptoms that can be worked through. There is also a manual on the NLG File system for the older version, there might be some information that will help. These games usually reset and come back to life quite nicely after resolving power issues that are common in them.

Chris

jont56:
Hi Chris,
My particular issue is that my machine is working, but on every payout I get an "Over Paid" error message and then I must reset the machine.
Trying to fix that issue.  I am new to slot machines, so I am hoping to avoid any unnecessary actions to find out I just need to do something simple.
Maybe someone has had the same issue and can advise on a course of action?

Thanks,
Jon

jont56:
Just as a follow up... I tried accessing the NLG File System to see what I could find, and I received a message that said I wasn't authorized to access the file.
 :banghead:

Navigation

[0] Message Index

[#] Next page