**Reel Slots** Gaming Machines > Bally Alpha Reel Games

Party Spin Topbox Device Error... Topbox not Configured

(1/2) > >>

Haywire Slots:
Working on an Alpha Party Spin, I have tried swapping out the usb cable & the wheel stepper motor. The motor locks up as soon as power is applied, & does not spin during boot up. The status & com lights are green on the control box for the top. Any ideas?

rickhunter:
The comm relay board on the reel goes bad a lot on these alpha reel machines.  That's the little PCB board that controls and communicates with the reel control board.  Replace it with a known good one and try again.

Haywire Slots:
will do, Thank you.

coolwavepic:
Is this Ultimate Party Spin? I must have a different model/version because I can disconnect the wheel and the game still plays but I can not get Reel Winners to recognize the wheel. Weird


A side note is that my software does NOT have the "Any bet of 90 credits or more spins the wheel". Maybe you need a different software version.

BiggerHammer:
Here is the version that Slam is running.
 

 
 

Navigation

[0] Message Index

[#] Next page

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
Go to full version