**Video Poker, Keno, Slots, 21** Gaming machines > IGT I-Game and Game King
044 green varta battery.
ChoiceMc:
--- Quote from: sirius7 on October 10, 2016, 11:56:34 AM ---
--- Quote from: ChoiceMc on October 10, 2016, 11:51:27 AM ---
--- Quote from: rickhunter on October 10, 2016, 10:20:28 AM ---Yep, if it's euro based it is an international version. Won't work without the Varta battery. I had to get an 044 board with the varta specifically to play an international flashboard that I have. So you will have to source an 044 mpu with a Varta setup.
--- End quote ---
Thanks rickhunter. So I just destroyed 3 perfectly good boards... yeey me... :banghead:
Thanks for explaining.
BR
Dan
--- End quote ---
You can always buy a new battery and solder it back on, along with U24. :duh:
--- End quote ---
I know, I didn't say I wasn't going to do that.
--- Quote from: rickhunter on October 10, 2016, 12:18:59 PM ---You can use those boards for US flash boards. So don't toss them, of course you could always put the parts back if there was no damage done when you removed the components.
--- End quote ---
I will, thanks. Fortunately, I am delicate enough that I took them off with respect :D :cool_thumb_up:
Tilt:
Here's a Youtube video I made that shows the quickest & easiest way to remove U24 that I've found. No soldering required and you don't have to remove the board from the tray either. Just remove the 044 flash card (or legacy adapter board if you're running 3902 software) so you can get access to the battery and U24.
http://youtu.be/_U6oaT9XwuI
sirius7:
:agreepost: Great video! Very helpful!
marcdavis:
--- Quote from: Yoeddy1 on August 23, 2016, 12:34:47 AM ---For what it's worth, the 75704402W Rev B version with the DB-9 connector may or may not work with only the green Varta battery removed. If you set up all of the options successfully, but you get a "Battery Low" message that won't clear at the end of the setup process, even with a brand new coin cell battery, you'll need to also remove U24 from the board. Once that's done, do a complete clear with Key28 again, and your game will be right as rain.
Thanks,
Jason
--- End quote ---
Just ran into this exact problem with a 75704402W Rev A board - only removed the battery first; but managed to get by the Bat Low message after config - but it kept randomly coming up later. After removing U24 the board was stable.
Navigation
[0] Message Index
[*] Previous page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |