Bill Validators, Currency Acceptors and Printers > MEI Mars Bill Validators

Validator only reads tickets upside down

(1/3) > >>

dailey:
I have an MEI Cashflow SC6612U bill validator in an S3000 machine. It works fine except it will only read tickets inserted upside down.

According to the model number, this head is an up stacker. Is this the wrong head for this machine as it is clearly down stacking ?  I'm trying to understand this. Can this head be swapped with an SC6602 from an S2000 and will this correct the upside down issue ?

RB:
6612U is an upstacker. You can use a 6602U or maybe a 6602 with the correct flash. Is that an ID028 machine?
Looks like an S3000?

dailey:
It is an S3000 machine.

sixcardmark:
Look under machine settings and see if it is using ID024 or ID028.  IF it is using ID024 then yes that would solve your problem.

dailey:
Correct me if I'm wrong, but I believe the reason the validator will only read tickets upside down is because it is an upstacker head (SC6612-U) installed in a downstacker installation. To read a ticket inserted right side up I need a downstacker head.

I pulled an SC6602 from an S2000 machine and tried it, but it didn't work. I got the message "device not connected".  Is this because it wasn't a USB head (SC6602-U) ?

Navigation

[0] Message Index

[#] Next page