Progressive Controllers and Displays > IGT Stand-alone Progressive Systems
Spectrum 5 Pinout v. 6 Pinout
SlotMachine4You:
Went to install a Spectrum into an S2000 machine and was duplicating harnesses from another. Original spectrum has a 5 pinout molex and the one I'm installing has 6 pinouts.
I have spent an hour searching the old site and gleamed some information but not to the point where I feel comfortable I wont fry something out.
Does anyone have details on the 6 pin molex to netplex configuration?
Much appreciated,
Mike
SlotMachine4You:
Here's some pics of the two.
Never mind the wire colors of the 6 wire molex. Stole from another part.
Hoping someone has a solution.
Thanks,
Mike
SlotMachine4You:
Anybody?
A clear pic of both the 6 pin plug and the Netplex plug will do.
:thank_you:
:Please_Post_Pictures_2clr:
SlotMachine4You:
Maybe I need to buy a 5 pin spectrum board instead?
Ken:
Can you post a picture of the board that the display is plugged into?
My guess is that the 6 pin plug is for an S+ machine and the 5 pin is for the S2000. I have a spectrum unit for an S2000 available.
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |