**Reel Slots** Gaming Machines > Bally Electromechanical

How to connect the "Input meter"?

(1/2) > >>

JanGbg:
Hi!
I bought a new machine called Bally Mustang. After a lot of work does it work properly now. But the "input-meter" dont registrate how many coins who are played. I change to one I now works, but no reaction. Do someone know to what I chall connect the 2 wires?
(Sorry about my poor English!)

Jon:
a model number a few pictures would help us dramatically trying to help you through this problem

JanGbg:
I think it's the same connection for all the bally em. I now saw the wiring diagram that should be connected in parallel with the handle release sw. Thanks anyway!
It's a really fun machine, so if you want I can put some pictures anyway. :-)

Jon:
here is the basic wiring for the coin in meter

OldReno:
Hi JanGbg,
On page 18 of your Bally EM manual you can see a bit of the schematic also for the coin in meter.
Often the power for the meters run through the Door Interlock switch, which is a little push button switch in the lower right corner of your machine when you open the door.  It is usually next to your coin drop tube which goes to the cashbox.
Just try to trace out the wire that you had originally to the non working meter.
Hope that helps.

Navigation

[0] Message Index

[#] Next page