**Video Poker, Keno, Slots, 21** Gaming machines > WMS Williams Video
Topper connections...fluorescent light...where to plug in?
Yoeddy1:
Ok, here are a couple of photos and a video of what it looks like. I didn't get a picture with the insert off to show what's inside the topper, but the cables that come out of it should match up with the ports on the distribution board. In fact, I don't think any of them are the same, so it shouldn't be a way to mix anything up.
A couple of questions for those having issues...
Is the LED ring connected internally and is it known to work properly? When I was testing mine, I was thinking the top candle didn't work at all and that I missed a plug or something wasn't connected right. After taking the candle apart, the bulbs were smoked. Replaced the bulbs and wallah! Like I said, the fluorescent lights in the top box and topper had the same plug and I could only run one or the other. Then I looked in the topper and found the pigtail that allowed me to connect another 3 plug cable that I had and and run it to the unswitched AC plug on the distribution board.
http://youtu.be/H2Y2253TriY
Thanks,
Jason
Yoeddy1:
Here's a full body shot with the topper installed.
Thanks,
Jason
coolwavepic:
Looks good Jason! I figure out that my LEDs weren't connected in mine.
But, what is this remote you are talking about?
Yoeddy1:
--- Quote from: coolwavepic on June 22, 2015, 04:03:04 PM ---Looks good Jason! I figure out that my LEDs weren't connected in mine.
But, what is this remote you are talking about?
--- End quote ---
Thanks Charles. Glad you got it connected up!
So inside of the topper, there is a small black rectangular box that has a small button on it. When I push it, it will turn LEDs on solid either bright or dim. It will also cycle the LEDs either bright or dim. I select cycle and bright. If I left it on one of the other settings, I'm not sure if it would stick. Perhaps it's a diagnostics tool to test the LED ring?
Also, I was wondering what you guys use as the cap underneath the topper on top glass chrome. Is it a special cap when a topper is installed? I just dismantled a candle and use the base as the cap. Is that right?
Thanks,
Jason
Jimise:
That's a nice looking machine Jason!
The topper really finishes it off nicely! :cool_thumb_up:
--- Quote from: Yoeddy1 on June 22, 2015, 03:46:27 PM ---Here's a full body shot with the topper installed.
Thanks,
Jason
--- End quote ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |