**Reel Slots** Gaming Machines > SIGMA Reel Games
SG-50 BM Power Supply Needed
(1/1)
wallbanger:
HI All, Have already searched many of the sites for parts to no avail. Post away or PM me if you have one you will part with. Barry had one, and it works!!!
Amechanic:
You might want to post a picture of the front of the power supply and any numbers on it. I have found that bad capacitors were the problem with the Sigma machines.
wallbanger:
Problem is that I don't have one at all
Jim:
check with Darell from slots4homes, he had some of these at one time. he may be able to help, if he does not have any, you could find separate power supplies that will provide the voltages needed to run the machine. that's what Sigma did in there first games. you will need +5 vdc, +12 vdc and + 24 vdc.
I would have to look at the schematics and get the correct color wire versus the voltage, I think red is the +5vdc, orange maybe +12vdc, yellow maybe +24 vdc. Marlin P Jones is a good source for power supplies (Florida) probably could find one that provides +5 and +12 in the same supply!
Hope this helps.
Jim
Navigation
[0] Message Index
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |