Bill Validators, Currency Acceptors and Printers > Printers - ALL
PRINTER QUESTION
(1/1)
lazzerjett:
Hello, I purchased this printer a few years ago and found it was not the printer setup that I needed. I just ran across it still wrapped in bubble wrap in the box it came in.
Does anyone know what type of machine it goes in? I just remember that at the time it was not for my IGT I-Game.
rickhunter:
Firmware is for Atronic machines. You can flash it for IGT, but you need a special serial cable, the firmware, the key to enable flashing on the printer, and the software to flash the printer. You also need the netplex interface cable, your cable is a serial interface cable. It is probably easier to just buy another printer with the correct firmware on it. You need netplex firmware GUN10500 or similar, which should also come with the netplex interface cable.
lazzerjett:
Thanks Rick, I don't need a printer now just wondering if it would be good for someone that has a compatible machine.
Navigation
[0] Message Index
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |