New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Nepa Coin Op on June 27, 2023, 02:57:50 AM

Title: UBA Bricked???
Post by: Nepa Coin Op on June 27, 2023, 02:57:50 AM: I have a UBA here I was flashing and as the program started dumping the file, the program disconnected, I could hear the usb disconnect tone, previous to that the unit booted cycled ect, now it does nothing, wont cycle or connect to the pc, anyway I can correct this or is it toast???

Thanks
Title: Re: UBA Bricked???
Post by: Harp on June 27, 2023, 04:49:43 AM: Have you tried a Forced Download
Title: Re: UBA Bricked???
Post by: Nepa Coin Op on June 27, 2023, 04:52:36 AM: Quote from: Harp on June 27, 2023, 04:49:43 AM
Have you tried a Forced Download

im not familiar with that process....

The PC does not recognize it plugged in, how would I go about forcing a SW update ??

I did reinstall my tool suite in case that was corrupt still have the same scenario
Title: Re: UBA Bricked???
Post by: Harp on June 27, 2023, 05:55:12 AM: Dip Switch 6,7,8 in the Up position the power up
Title: Re: UBA Bricked???
Post by: Nepa Coin Op on June 27, 2023, 06:32:19 AM: Quote from: Harp on June 27, 2023, 05:55:12 AM
Dip Switch 6,7,8 in the Up position the power up
That got it up and going

THANK YOU !!!!!!!
Title: Re: UBA Bricked???
Post by: Harp on June 27, 2023, 06:37:57 AM: :applause: welcome