New Life Games LLC
Homebrew Player Tracking and EFT Systems => NLG Homebrew Player Tracking and EFT Systems => Topic started by: bogan on December 05, 2019, 05:56:41 AM
-
<deleted>
-
Welcome to NLG
I have a one of these gathering dust. Maybe time to dig it out and learn a bit of linux.
How do you do the Mark/Space parity on this and how do you develop code for these devices.
PS - these these are cheap but you can do probably make a Arduino version for well under $5 using chinese arduino clones.
-
<deleted>
-
<deleted>
-
Hello Bogan
Thank you very much for the detailed reply. Very good info.
Going to dig up my Orange Pi and have a play.
Regards
Ian
-
<deleted>
-
Cool
How do you go about writing C programs to access the serial port once you have the board booted with Armbian ?
Looks like wiring (On which Arduino is based) will run on the Orange Pi.
For non technical users is it feasible to provide a SD image with Armbian and custom code so all they need to do is load the Orange Pi with this for a plug and play solution?
-
<deleted>
-
<deleted>
-
<deleted>
-
<deleted>
-
<deleted>
-
Hi
Unfortunately Armbian does not seem to be supported but this project does what you need for raspbian.
https://github.com/balena-io/wifi-connect (https://github.com/balena-io/wifi-connect)
-
<deleted>
-
i will buy orange pi, i would blike to test it.
got a raspberry pi, but failed to make SAS com.
this guy made raspberry pi AFT transfer
https://youtu.be/QnDp5YdC67M (https://youtu.be/QnDp5YdC67M)
-
<deleted>
-
Hello Bogan
Orange PI is up and running with Armbian.
Any chance you could walk us through a basic program to poll a SAS machine.
I think once i can get this going it should be easy enough the re use code done for Arduino for validation and system bonussing.
Regards
Ian
-
<deleted>