New Life Games LLC
Homebrew Player Tracking and EFT Systems => NLG Homebrew Player Tracking and EFT Systems => Topic started by: Cocotech on December 12, 2020, 12:56:50 PM
-
I have this Bally player tracking unit (see pics), which does not seem to be connected to any power, data,etc. This is an IGT I-game, 044 MPU, Panda cabinet with Bettor slots TITO installed. There is no SAS cable or any obvious power connector. I do not need the card reader to actually read cards, but I was wondering if I can at least get it to "light up" to match the rest of the machine. Do I need a special control unit or can it be hot wired to light up?
-
Maybe....I need to see the etching on the circuit board.
Your photo should have at least one side ( height or width ) sized to 1000 pixels or 1000kb.
Your photo won't allow us to see the writing on the circuit board clearly.
The website instructions for photos....>>>
Allowed file types: xls, doc, mp3, gif, jpg, mpg, pdf, png, txt, zip, jpeg, bin, psd, wmv
Restrictions: 5 per post, maximum total size 5000KB, maximum individual size 1000KB
I'm pretty we can tap into a couple of power wires to light up the PT LEDs.
-
Same type I have a bunch of. I would suggest buying a Mastercom 250 or 300 box, and hook all that up. It's fun to have the card reader lights as well as the display with a message.
-
PM me if you're interested in the parts needed to light it up.
Thanks,
Ken
-
You can also get the display and player tracking working with this option: http://newlifegames.com/nlg/index.php?topic=29710 (http://newlifegames.com/nlg/index.php?topic=29710)
Arduino-based Display, Player Tracking and TITO.
Marc
-
Here is a clearer picture of the card reader
-
It's Mastercom stuff. A Mastercom 250 will get it lit up. Contact the Ken, he can set you up with the missing parts. But other than a scrolling message on the display and the leds around the card reader to light up, it won't do anything after that. But it does look cool to see it all lit up.
-
This is a picture of the bally mastercom 250. I have everything else that goes with it to have it light up. You might even get a message displayed on the left side depending on how it's programmed.
If this is something you might be interested in let me know.
Thanks,
Ken
-
Those 250's that came from one of Trump's casinos will turn the LEDs green around the player tracking card slot if you insert a Trump player card.
-
Those 250's that came from one of Trump's casinos will turn the LEDs green around the player tracking card slot if you insert a Trump player card.
The machine then throws up? :rotfl: :24:
-
LOL .. stand there and let us know if you get slimmed.
And I'm pretty sure it came out that trump casino that had all the bright gold cabinets.
-
Thank you everyone for your assistance! I'll be ordering a Mastercom from Ken after the holidays.
-
I can program cards...
-
I can program cards...
I'm having an alphanumerical nightmarish deja vu event...haha
I did it once...after that, I said to myself..."never again" :rotfl:
-
Eddie
Can you program the Mastercom device to scew a message of my choice ??
Also
You program Cards ?