New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM DBV-45, DBV-145, and DBV-200 Bill Validators => Topic started by: Slots4me on January 17, 2022, 12:27:53 PM

Title: DBV-200 PROBLEM
Post by: Slots4me on January 17, 2022, 12:27:53 PM

I have a jcm Dbv-200 on a igt having problem accepting bills
Tested on 1 dollar bills and old 20 both have worked
They will accept but takes 10 times or more to accept bill
I only dip switch on is 10

Title: Re: DBV-200 PROBLEM
Post by: Slots4me on January 17, 2022, 12:38:27 PM

Takes $20
Better then $1

Title: Re: DBV-200 PROBLEM
Post by: Badbaud on January 17, 2022, 01:24:20 PM

V 3.60 is the last version of the 200 head but that last version takes new and old $20 bills.

Title: Re: DBV-200 PROBLEM
Post by: Slots4me on January 17, 2022, 01:46:40 PM

$1 and $20 bills are accepted at just takes 10 tries to get them to accept

Title: Re: DBV-200 PROBLEM
Post by: Sunrise Side on January 18, 2022, 06:58:38 AM

I'm assuming you opened the top and cleaned the optics? If so then it most likely needs calibrated and I do not know who does that. Maybe Badbaud or  someone else on here?

Title: Re: DBV-200 PROBLEM
Post by: Slots4me on January 18, 2022, 07:10:34 AM

Yes
Cleaned head
I am looking for a new head
Getting it Calibrating would be nice to

Title: Re: DBV-200 PROBLEM
Post by: Sunrise Side on January 18, 2022, 04:47:18 PM

Jim Midwest Slots may have one