New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM DBV-45, DBV-145, and DBV-200 Bill Validators => Topic started by: rjpohl on December 18, 2014, 11:04:06 AM

Title: DBV200 problem in S+
Post by: rjpohl on December 18, 2014, 11:04:06 AM: I've shipped a guy a full DBV200 setup (everything including housing/power supply/head/transport/screws/etc) for a S . I tried the bv head/transport in my test machine before shipping and it worked. It seems to cycle and setup properly (I listened to it over the phone) and it's enabled (9-1). It does not even attempt to pull a bill in. Could this be a bad power supply even though it cycles and sets up? I plan to ship him a power supply but thought I'd ask if anyone has any other thoughts (motherboard/cpu).
thanks
Bob
Title: Re: DBV200 problem in S+
Post by: shortrackskater on December 18, 2014, 11:12:41 AM: Has he checked the "standard" things:
Is the bill box seated?
Are all doors closed...optics aligned?
Check all wiring/plugs?
Is the unit seated properly with the latch down?
Title: Re: DBV200 problem in S+
Post by: Buzz on December 18, 2014, 11:20:37 AM: http://newlifegames.net/nlg/index.php?topic=4226.msg8620#msg8620 (http://newlifegames.net/nlg/index.php?topic=4226.msg8620#msg8620)

Bob Look at reply 23
Title: Re: DBV200 problem in S+
Post by: rjpohl on December 18, 2014, 11:26:11 AM: Quote from: shortrackskater on December 18, 2014, 11:12:41 AM
Has he checked the "standard" things:
Is the bill box seated? Yes
Are all doors closed...optics aligned? Yes, it accepts quartes and plays
Check all wiring/plugs? Yes
Is the unit seated properly with the latch down? Yes
Title: Re: DBV200 problem in S+
Post by: rjpohl on December 18, 2014, 11:27:14 AM: Quote from: Buzz on December 18, 2014, 11:20:37 AM
[url]http://newlifegames.net/nlg/index.php?topic=4226.msg8620#msg8620[/url] ([url]http://newlifegames.net/nlg/index.php?topic=4226.msg8620#msg8620[/url])

Bob Look at reply 23

Thanks Buzz, question will the bv setup if pins aren't bent properly?