New Life Games LLC
Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Arcade Games **Video** => Topic started by: gmtransman on November 16, 2021, 04:38:25 PM
-
i have a neogeo one slot that all the buttons and joystick switches are stuck on the player one. player two works fine. different board works fine in cabinet. where should i start. thanks
-
Measure the resistance from the player 1 inputs to +5v. There's a resistor in a resistor pack in there that ties them to +5v so they sit at logic high until the button is pressed. I forget the value, but it'll be the same for Player 2 controls. If the resistor pack is broken, it will be floating instead of being logic high.
Check continuity and for trace damage.
Follow the traces back to the NEO-C1 chip (newer boards have a different chip...) to make sure you have no trace damage.
If everything checks out, replace the chip.