New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: mrhat187 on April 19, 2021, 02:36:28 PM
-
So I just got my first slot machine total idiot. Trying to figure out how to just get it open, there is 1 key for the very bottom which is where the coins fall I guess. One key on the left that opens up I believe the settings menu. And then a final key on the right which I think should open the slot machine but I can't get it open. it isn't a standup slot it is a sit down one where it came with its own seat. Just wondering how do I get it open if there is a trick. It takes quarters.
-
Any ideas? BTW the key on the right is not a normal key it is one of those weird circle ones. The other two key are regular small ones. The top of the machine has a hinge so it should flip upwards not to the side. I just can't figure out how to get it to flip up.
-
Can You post a picture of what you have?
-
I actually got it figured out you just have to turn the key really really hard. So I got it open. I don't think the coin hopper works when I put quarters in they just get stuck immediately. Is there any way to test if the coin counter in works? But if I push on the coin catch then the could would come out like it was a bad quarter. Also I some how turned off the sound going through the options menu. I think this is an S slot.
-
Can You post a picture of what you have?
As Sunrise Side asked... please post a photo of your machine.
Also, please don't double post the same subject in two different areas of the forum. It can get very confusing.
-
(https://bid.texasauctionrealty.com/images/lot/2592/2592212_0.jpg?1421101315)
-
Got the coin comparator running, its taking quarters hurray. only few problems. I can't get it to take more than 2 at a time, so I can't save up credits. Also every win acts like a hand pay instead of just awarding credits and counting up. Gotta figure out the settings menu.
-
That's the way the machine works. The workaround is to use an SP chip that uses montana-style credits (also known as euro-style credits). The latest chip I know of if SP1137. That will allow you to set it up so you can feed coins to credit meter until you read credit limit.
-
Im not the go to guy here as I need all the help I can get with my machine, but what about your Cash/Credit button? If I turn mine off the machine pays out, when turned on the winnings go to credits. Maybe its that simple.
-
He is referring to inserting coins to stack up credits. Most all S+ are sold with the standard nevada type credits, where the coins are immediate bets, so the machine will only accept the number of coins that will make the max bet.
-
If thats the way it works thats fine. I'd like to just turn off the every win is a jackpot style win where I have to use the key. There's no way that is how it's supposed to work haha. I have a credit and win little LED screens.
-
Sounds like you need to increase the credit/hopper limit.
-
Could be hahaha, I've been trying to figure out what the settings menu does. I know the all blank is the "game on" or whatever. But that is all I know.
-
Please follow the directions on the page linked below to let us know what SP chip you have installed in your machine. With that information we can assist you with adjusting the settings so your machine will accumulate credits when you win, rather than going into a jackpot/handpay mode every time.
http://www.newlifegames.net/spset/SPSS.htm (http://www.newlifegames.net/spset/SPSS.htm)
-
My machine is a sit down not a stand-up. I don't think these instructions apply. There is no CPU board from what I can see.
-
My machine is a sit down not a stand-up. I don't think these instructions apply. There is no CPU board from what I can see.
:duh: :banghead: Every modern slot machine in the world has a CPU circuit board.
You are allowed to called it an MPU too if you want....it doesn't matter.
Why not show us a photo of the insides of your slant machine and I will draw a BIG RED ARROW showing you where it is?
-
I found it, only problem is I'm not sure how the hopper comes out and I can't remove it without taking that out.
-
Well I couldn't pull the board out but the chip is S-Plus game
SP1048 Type 0/1/4/5
12/29/98 (1-512)
@IGT L99-0167
2nd chip
DBL DIA
2 Coin
553443
-
Hmm I looked through the bible and didn't see anything on an SP1098, anyone have any ideas? I saw Mississippi gaming commission retired the chip hahah but that was about it.
-
You have an SP1048 chip.
Open the door and press the little white button until you see a 7 on the display.
Turn the jackpot key until you see a 3.
Use the deck buttons to change the numbers to "9999" on the display.
Press the max bet to save new credit limit setting or close the door.
There's other things you can do with that SP chip version but I'm tired to explain it all to you right now.
I just had my 2nd vaccine shot this morning....
Good luck.
-
Yeah as I've said there is no "open door" this is a sit down machine. I can "flip up" the table but the test button doesn't do anything from this view as the LED screen is inactive. I did go to the 7 with the key and used spin reels to increase the hopper number (I think that is what I was doing I was guessing based on what I read). Didn't know i needed to press max bet to save it. I'll try that.
-
You were right it's a pain in the ass to hold it up while on the test button. But now the hopper pays on a win so I don't need to reset it. Now how do I turn off the bell for wins only on say a big jackpot win? You are the man by the way.
-
I usually just pull the connectors apart for the bell...should be a connector housing a few inches from the bell end.
I don't know right now if there's any setting for the bell to ring on jackpots only.
On the motherboard, or backplane board where the MPU pushes down into, there's a small black 2-pin connector with the letter/numbers [J11] on the circuit board next to it.
You gently squeeze the latch on the connector plug and pull up...it will come off....no more loud bell.
-
So I unplugged the bell and got an error code. Now the reels are slowly spinning and the display is showing 3100. I plugged the bell back in, turned it off turned it on, hit the test switch flipped the jackpot key pressed buttons. Nothing does anything now which is a bummer. Any ideas?
-
Error code 3100 means extra coin out. Nothing to do with the bell.
Press the white test button once close the door, that should clear.
If it doesn't Perhaps your hopper is not seated right.
It also sounds like you have a reel tilt --- slow moving wheels, perhaps you touched one of the reels when it was running.
Once you get past the 3100, you will get a error 41 or 42 or 43... 123 corresponds to the wheel.
Again press the white test button, close the door and that should clear.
There is a setting that rings the bell on all wins, or hand pays (jackpots) only, there is No off other than pulling the wires.
Use the white button to go to 2-6 and then Spin button to select, followed by the jackpot reset key to change it to a 0 or 1 followed by the spin button to lock it in, and then press the white button again to go to the next section, close the door and play.
-
So extra coin out what does that mean? Did the step the button doesn't do anything nothing moves or changes. If I turn it off and turn it back on it dings once then goes right into the error. Strange.
-
Yeah can't clear the 3100, the hopper doesn't move. I honestly don't even see how I could get it out it's pretty bolted in. I can remove the coin comparator easy enough that just lifts out. So I've pressed every button turned off the power back on unplugged plugged door open closed pressed all buttons in every possible combination. The same state reels just move slowly, change button flashes, shows me 1 coin and 3100 in the payout window flashing. On the candle both lights flash.
-
Tried to post a video but the file is to large. Guess I shouldn't have messed with the bell hahaha was running smooth.
-
The front panel of machine comes off and the hopper slides out the front.
-
No I don't think so theres a huge metal bar there, a metal plate, then an armrest. Might be able to lift it straight but out it doesn't really move. Not even sure how the bucket piece is supposed to come out.
-
With the door open, turn the j/p key. reels should stop. close the door and they should spin to finish interrupted game
-
Pretty much all the front panels come off. And the hopper slides out with the coin elevator I think. Its been over 12 years since I had a slant top but even I, not having any knowledge was able to restore 2 of them. Fiddle around a little bit.
First pic is of one of the machines restored next to an unrestored machine. All my electronics worked but I pretty much had to disassemble everything when I sanded/painted. Just took my time.
And the shot of Crown was my celebratory drink after finishing the first one..... :applause:
-
ok turning JP key with the lid up worked. Fired back up now after plugging the bell back in I hit a winner and I got a 3200 error. Getting close to getting this figured out hhaha.
-
Ok cleared the 3200 error I think when I was messing with the hopper it was to far forward. I still dont see how the actual thing comes out though everything just looks bolted screwed and overall stuff in there. I see the tracks where it looks like it should slide forward but I don't see any way to move the aluminum plate on the front hahaha. Also I went through the bible and setting 6 I just can't change setting 7 is to set the hand pay amount for 1st and 2nd coins. Setting 9 I changed from 0 to 1 and I think that was to change from paying out to keeping credits. As now it doesn't automatically pay it holds the credits until you cash out.
-
There is a release lever, be careful it will fall on your feet when it comes loose.
It is a round knurled knob in center, pull it up real hard and the panel will fall out.