New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: B_S on March 17, 2023, 01:18:50 AM
-
So I picked up a Bally game maker V7000 bar top for $50
Has a coin hopper but no coin mech
When I first got the machine would barley turn on
Fixed a couple of bad Caps on the power supply
And it would boot up
I bought a clear chip for it cleared the game settings
Had a coin hopper error (it would keep running backwards )took the coin hopper apart and got that error to disappear guessing it was a bad connection ?
Haven’t been able to get the DBV-200 bill validator working just turns on runs for a bit and will take a bill in and just stop with the bill part way in tried $1 ,$5 , $10 , $20 , $50 bills with no luck
All the dip switches are in the off position
Is this an issue with the bill validator ?
Or do I have something set up wrong ?
Just kind of stumped with This machine
-
Forgot to put in the post
Cleaned the bill head with glass cleaner didn't change anything
Checked all the capacitor’s in the billhead all seamed fine
Pulled all of the connectors in the machine and reseated them all since it looked like a mouse or rat was in the machine at some point in the past
The attached photo was where all the dip switches were originally on the DBV bill validator
-
I picked up a few more game makers
Tested the bill validator and it works in the other machines
So I guessing it’s a power supply issue/bad MPU ?
-
Got it working
Figured it out
Had a bad bill transport