New Life Games LLC

**Reel Slots** Gaming Machines => IGT M Slot Reel Games => Topic started by: freesurfer on April 22, 2020, 11:00:13 AM

Title: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: freesurfer on April 22, 2020, 11:00:13 AM

Hy someone can help me?i have chanced the boards CPU  and and the slant board backplane (the olds boards are dead) these boards are tested on mine triple diamond slot and they are fully working but in the 4 reels super seven jackpot the 4 reel doesnt turn is freely. what is differn to the 3 reels whats wrong?What i have wrong?
many thanks Mattew

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: Stayouttadabunker on April 23, 2020, 08:59:52 AM

What are your SS and SP chip numbers?

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: Tilt on April 23, 2020, 05:41:47 PM

That's not an M slot.  Looks like a S or S+, but can't tell from the pictures.

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: freesurfer on April 24, 2020, 12:27:01 PM

Here you are picture about SS SP and
many tanks for interesting

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: freesurfer on April 24, 2020, 12:41:16 PM

Sorry best  immage

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: freesurfer on April 25, 2020, 04:35:34 AM

I'm not sure about these are the correct eprom for this machine.
The test with the white button cann give me the correct eprom number with possibily wrong eprom in the board?
WEhat can i do?
many thanks

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: Stayouttadabunker on April 25, 2020, 07:32:38 AM

The two chips appear okay...I wish you could have shown us more pictures of the MPU board.
I need to see inside of the door too...I don't like the way the coin guide is crooked like that on the deck.

If you can, show us photos of the harness under the reels.
Try to follow the harness down to the motherboard on the floor under the MPU.
Squeeze the middle button on the large black Molex connector, wiggle up and push back down.I wonder if the pins became oxidized.
Pulling the connector up and down on the pins will help get a better connection for the reels.

Another thing you can try is to switch the 3rd and 4th reel connectors temporarily to see if the problem follows the reels.
Remember, never to remove or install anything component with the power on.
You have a very rare 4 reel S+ machine.

I would like to see a photo of the right side of the machine too (The side with the pull handle)
I think the topbox and bottom cabinet are laminated with one piece.

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: freesurfer on April 26, 2020, 06:05:29 AM

Ok thanks need more picture but all the reel works  i try change possition of the reels and wiring are ok 

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: freesurfer on April 26, 2020, 07:51:09 AM

I have problem with mine message there arent in mine box message

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT Stayouttadabunker
Post by: freesurfer on April 27, 2020, 11:40:19 AM

Stayouttadabnker many tanks for interesting  the board complete is the not working, the other is the working and tested in mine IGT triple diamond  the cable are ok no OXIDIZED and i have use correct spry  wiring


[size=0px]Another thing you can try is to switch the 3rd and 4th reel connectors temporarily to see if the problem follows the reels  : all the reels are in working order[/size]
[/size]
[/size][size=0px]please i thikn (but its only a mine idea [/size][/size][size=0px]but im only a simple soldier you are the general[/size][size=0px][/size][size=0px]) the SS and CP  epron can be for a 3 reels its possible to  ceck?[/size]
[/size]
[/size][size=0px]Ciao [/size][/size]Stayouttadabnker

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: freesurfer on April 27, 2020, 11:44:33 AM

Stayouttadabunker many tanks for interesting  the board complete is the not working, the other is the working and tested in mine IGT triple diamond  the cable are ok no OXIDIZED and i have use correct spry 
Another thing you can try is to switch the 3rd and 4th reel connectors temporarily to see if the problem follows the reels  : all the weels are in working order

please i thikn (but its only a mine idea but im only a simple soldier you are the general) the SS and CP  epron can be for a 3 reels its possible to  ceck?
ciao STAYOUTTADABUNKER

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: sixcardmark on April 27, 2020, 12:41:43 PM

SS1918 = 4R 6CM TYPE 0 58A250 92.051
SP114 is old old old 256 chip.  Is jumper set correctly for 256?

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: sixcardmark on April 27, 2020, 03:02:13 PM

I do not see a jumper on your new board.  Try the 512kb SP from your other game.

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: Stayouttadabunker on April 28, 2020, 06:04:02 AM

Next to the Reel Prom socket is a 2-pin jumper connecting onto pins [317] and [318]....move the jumper to the next set of pins.
Re-install the MPU and turn on the machine and tell us in detail what happens.
Also, turn on the dip switches 1 to 4(Press down to the left) ....leave switches 5 to 8 off.

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: freesurfer on April 28, 2020, 10:52:00 AM

SIXCARDMAX Many tanks for control the eprom identity ok i try change the 512 and yes teh new board don't have pin


STAYOUTTADABUNKER ok i can change the switch 1234 in  on position and 5678 off position but the new board is that whitout pin
the no working board is made USA   its china (covid 19) made but it tested and work on mine s plus triple diamond  and the board on mine TRIPLE D is the same

sorry if I give you useless  information but I try to give you the maximum amount of information I'm not a professional like you

[/size][/color]

[/size]I will recheck the wiring and the absence of oxide for greater certainty and I will carry out your directives I hope as soon as possible cause covid problem[/size]
thanks for now guys order organization and determination resolve[/color]

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: sixcardmark on April 28, 2020, 11:28:22 AM

I thought so!  Just use any type 0 512 SP on your new board with your 4R SS chip and it should work.(if the SS chip is good)

Title: Re: 4 REEL IGT SUPER 7 SLOT SUPER JACKPOT
Post by: Stayouttadabunker on April 29, 2020, 05:48:43 AM

Any luck?  :scratch-head_2: