New Life Games LLC

Coin Comparitors and Other Coin acceptors => Coin Comparitors and Other Coin acceptors => Topic started by: Jypsy on March 05, 2021, 07:05:30 PM

Title: Are comparitours intetchangeable
Post by: Jypsy on March 05, 2021, 07:05:30 PM

I have a Coin Mechanism comparitir that I need to replace. Its a model CC-16-C. I can find CC-16-D or E on Ebay but I don't know if that's a brand ID or a version build identifier. Mine is from a Bally 5500. Is it compatible as a substitution?

Title: Re: Are comparitours intetchangeable
Post by: RB on March 05, 2021, 08:27:30 PM

The D or E revision is not important. What is important is that you replace that 24VAC comparitor with the same. A 12 or 13V will not work. The gray wires on the rake coil are indicate 24V. 12/13V will have green wires.

Title: Re: Are comparitours intetchangeable
Post by: Stayouttadabunker on March 05, 2021, 09:10:18 PM

Something doesn't look right with the small connector on the coin comparitor harness...can you show us a better photo of that harness where it connects to the left side of the CC?

The reason why I'm asking is because I don't see the jumper loop on yours.

I could be mistaken.