Bill Validators, Currency Acceptors and Printers > Printers - ALL

Ithaca 950 Programming Cable

<< < (2/5) > >>

a69mopar:
https://www.transact-tech.com/support-info.php?id=150  this was all i could find.

Wayne

Stayouttadabunker:

--- Quote from: Slotman on October 27, 2022, 07:29:56 AM ---but thats not the IM port that the Programming cable plugs in to. I tried using that as a guide but to no avail.
The IM port is the 4 pin minifit molex on top of the printer that is only used for programming or graphics.

--- End quote ---

okay...I didn't know there was more than one 4-pin port?
Hopefully the links a69mopar posted helps ya.

Slotman:

--- Quote from: a69mopar on October 27, 2022, 07:56:44 AM ---https://www.transact-tech.com/support-info.php?id=150  this was all i could find.

Wayne

--- End quote ---

I appreciate the help, thats not the one.  Patriot and Ithaca want 100$ for a 3 dollar cable and all it is 4 fin molex to a RS232.

https://www.transactsupplies.com/store/ASSY-EPIC-950-PROGRAM-ADAPTER/

Stayouttadabunker:
I wonder if it's different from the one "Stumpy" is talking about in this topic?

I wonder if you gave "Stumpy" your email addy, if he will help you with the pinouts he has that connects the com to a laptop?...>>>

http://forums.delphiforums.com/slottech/messages?msg=18529.1&gid=2131937201

It doesn't seem to be answers here on NLG on this Ithaca printer pinout question you have because I've been looking for quite a while without any luck.

Eddiie:
Serial idle is high.   To send a bit, it goes to ground.     Can you take a voltmeter and see if you get any voltage readings on the 4 pin header?
That should tell you the serial level voltage you need to deal with and if you need a TTL adapter or if it is simply a connecter with rx/tx flipped.
The pin with positive voltage is your TX pin (if it isn't 24v)...   I'm expecting 3.3, 5, 12, 16...
??

Navigation

[0] Message Index

[#] Next page

[*] Previous page