New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Atronic Games => Topic started by: Fourbyracer on February 12, 2019, 06:20:02 PM
-
Hey guys, I just replaced a dead battery on my Atronic Emotion and now am getting "Ram Corruption" when I start it up. I don't have a key chip for it--is that what I need or does that signal bigger problems? It was working before the battery went dead.
Thanks for any info.
-
You need to clear the nvram after doing a battery change
-
Thanks idesign. So do you suggest to post a want ad for a NVRAM clear chip or do you know where I can get one? Or is that even the process?
-
Thanks idesign. So do you suggest to post a want ad for a NVRAM clear chip or do you know where I can get one? Or is that even the process?
Well, it depends on whether your game is progressive or not. What game is in the machine? Does your machine have a comm board along with the game board? Game board requires only a single RAM clear chip for U9, whereas the comm board needs 2 Clear chips also.
If the game is progressive it will be much more involved to set the machine back up again.
-
Thanks idesign. So do you suggest to post a want ad for a NVRAM clear chip or do you know where I can get one? Or is that even the process?
Well, it depends on whether your game is progressive or not. What game is in the machine? Does your machine have a comm board along with the game board? Game board requires only a single RAM clear chip for U9, whereas the comm board needs 2 Clear chips also.
If the game is progressive it will be much more involved to set the machine back up again.
Its a "Wild Fangs" non-progressive. It has 2 slide out boards, one with game eproms, and the other with communication eproms, both with the 3.6v lithium batteries (which I just changed). Here is a picture of what I am looking at. Where does that leave me?
(https://i1245.photobucket.com/albums/gg592/Fourbyracer/Atronic.jpg)
-
Ok, then you need the 3 chip set to clear the machine. Then after clearing it you can set the game up again. I think I have a set of clear chips if you need them I will look for them. I know I have the pdf file with the instructions.
-
Attached are the clear procedure instructions