New Life Games LLC
Coin Comparitors and Other Coin acceptors => Coin Comparitors and Other Coin acceptors => Topic started by: Slots4me on January 24, 2020, 06:45:43 AM
-
Hi just bought a Fourth of July three coin system
Has no power coming from coin comparitor
Opened up coin chute and their is a wire jumper on 1st and last pins on coin mother board from hack fix or something.
I want to buy new comparitor
Is my slot a s2000?
Will this comparitor work
IGT Coin Comparitor
CC16, 13V DC
Thanks Steve
-
Model is S2000
👍
I see a lot of them on EBay
Is there any difference in compatible units
-
Please post one photo of your machine, and one photo of the inside where the coin comparitor is, so we can get a better idea of what may be going on. It could be wiring, the sample coin, a connector, etc.
Does the machine work using a bill?
-
Main board on coin comparitor is shot
-
I am looking at a couple cc16D on eBay right now
Around 50 to 60 with shipping
-
If you stick another 13Vdc CC-16D in there, you're gonna burn it out.
Your machine is NOT an S2000.
Your machine uses 24VAC coin comparitors like an S+ does.
The correct one for your machine will have two gray wires exiting the circuit board to the coin rake magnet.
-
sent you a pm about your CC-16. Jim
-
Have you turned on the machine? what does it do or not do? any numbers in the displays?
Jim
-
Pic is start up
Then after start up displays 12 in winner pays
-
12 is low battery. I have a few extra if you are interested.
-
I bought cc16d in pic hopefully the right one
Other pic is when I turn it on "warm up"
Then displays 12 winner pays...
Thanks for help
-
The reason I asked for a picture of the cc-16 area, your connector looks as if it is missing the red jumper between the two pins. Maybe that's what they were attempting to do by putting that internal jumper??
anyway, the cc-16d connector has a red jumper wire between two pins .
Jim
-
it does not have jumper
I need to buy a harness with the jumper on it..
Or can I t tap one in
Thanks for letting me know
-
Jumper is pin 1 and pin 6 ?
Thanks