**Reel Slots** Gaming Machines > Bally Alpha Reel Games
Bally Alpha TITO Settings
rickhunter:
Can an OP Please Sticky this topic.
People are always asking about TITO settings. I'm going to post the Settings for all the platforms I have. Here are the settings on a Bally Alpha. I should point out that these settings
are nearly identical to WMS bluebird 1/2/3 settings as well.
After setting up all your other options (denom, game, machine devices, etc), select "Comm Setup" and then "Protocol Select" (this is using OS 336, in earlier versions, I think it says Serial Ports) as seen in picture #1
You will then see another screen. We are only concerned with Host Com 1, set this to SAS PRIMARY as seen in picture #2. Select Save, then the config letters will turn black as shown on picture #3, select that and you will get what is shown on picture #4. Change the validation to "SYSTEM" as show in Picture #4. Select Save, and if you don't go back to screen #3 select Previous. You should be on picture #3, hit "Device Owner Setup" (On earlier OS, it may read "Device Setup", but the button is in the same place). Hitting the "Device Owner Setup" should take you to screen #5, where you select the options in green as shown. After you have selected the items shown in picture #5, save and then select previous and then exit and you are done.
61Wally:
Great Evening to All, I just received my First Bally Alpha “REEL MONEY” machine. I was wondering if I need any key chip/card to set up my printer and TITO? Right now it is setup in “attendant pay” when I hit print ticket button.
rickhunter:
You need to have a TITO board (a printer is just one piece of the puzzle) and you also need a clear CF card and setup the game from scratch in order to enable ticket acceptance.
61Wally:
Thank You, I have a bunch of TITO boards. Do You know which Model machine this is, So I can order the correct CF card? Also, Is this going to be like a S2000, where I set up denomination, printer, bill validator, ETC.
Are the CF cards different for the ALPHA machines models?
Jaycyn414:
The clear cards are going to be different depending on which bios chip/Operating system you have. OS is the top CF card behind the right side door of your "engine" the bios is the eeprom on the cpu usually by the 2 batterys when you pull the cpu/engine out.
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |