New Life Games LLC
**Reel Slots** Gaming Machines => Bally Alpha Reel Games => Topic started by: Slots4me on July 06, 2023, 10:09:33 AM
-
What are the dip switch setting for Bally Alpha Gen 2 Rs232 printer?
-
(See Attached)
-
I need rs-232 not netplex
Thanks for reply
-
Sorry, I attached the wrong file. I just corrected it.
-
Great thanks
-
try dip switch 2 on, the rest off
-
This is test ticket
Baud rate is right not sure about fw#
-
will it print from the alpha setup menu? I run at 38400, but with different firmware. I list yours as Konami, but wouldn't say that it wont work
-
Attached
-
It is Konami 27083
Wrong fw looks like
No luck with dip 2 setup
-
you probably did this , but thought I'd ask. in your alpha setup, you set for seiko/Future logic psa66?
Thanks,
Wayne
-
Set up future logic
Printer com error
Dip switch 2
Printer cycles & prints test/ feed
I also have 2x ..Epic 950 rs-232 dip 7
#1 Works great
#2. Solid led on paper will not print
Same F.W. as #1
-
You can try dip 2 and dip 7 off for the epic. I'll look for my notes on that
-
Gen 1 for Alpha attached
-
You can try dip 2 and dip 7 off for the epic. I'll look for my notes on that
Dip 7 only works perfect