New Life Games LLC

TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories => Slot Stands and Bases => Topic started by: Joopers7 on March 07, 2021, 08:23:29 PM

Title: ON the NEW Stand
Post by: Joopers7 on March 07, 2021, 08:23:29 PM
Soooo these slot machines are a tad heavy, any creative ways to put up on a stand with min muscle. THANKS!!!
Title: Re: ON the NEW Stand
Post by: Tilt on March 07, 2021, 08:32:54 PM
Hydraulic carts like this will save your back and work well.

https://www.harborfreight.com/500-lbs-capacity-hydraulic-table-cart-61405.html (https://www.harborfreight.com/500-lbs-capacity-hydraulic-table-cart-61405.html)

Title: Re: ON the NEW Stand
Post by: Wzrd0803 on March 08, 2021, 03:52:14 PM
Lifting straps from Home Depot


Lifting Straps - Moving Supplies - The Home Depot (https://www.homedepot.com/b/Storage-Organization-Moving-Supplies-Lifting-Straps/N-5yc1vZcia7)


Shoulder Dolly ShoulderDolly 12 ft L x 5 in. W Moving Straps for items up to 800 Lb-LD1000 - The Home Depot (https://www.homedepot.com/p/Shoulder-Dolly-ShoulderDolly-12-ft-L-x-5-in-W-Moving-Straps-for-items-up-to-800-Lb-LD1000/204726780)
Title: Re: ON the NEW Stand
Post by: Joopers7 on March 09, 2021, 12:09:31 PM
Okay, new issue, bought a new coin comparator and the coins are falling into the Hopper however its not giving me credits, any ideas?
Title: Re: ON the NEW Stand
Post by: Stayouttadabunker on March 09, 2021, 01:15:38 PM
Do I get 20 guesses?

What kind of a slot machine you have would be a start?  :Scratch-Head:

Do you own a camera? Take some pics...

Title: Re: ON the NEW Stand
Post by: Joopers7 on March 09, 2021, 01:29:32 PM
All pics above
Title: Re: ON the NEW Stand
Post by: Stayouttadabunker on March 09, 2021, 01:32:07 PM
All pics above

 :sherlock: i don't see anything except dollies and carrying straps?

What kind of a CC did you get for what kind of machine?

Read my little disclaimer below....might help us help you?
Title: Re: ON the NEW Stand
Post by: jay on March 09, 2021, 02:58:01 PM
I have a "friend" who just might have used a couple 2 x 4s and some old encyclopedia Britannica's. :duh: 


Put the machine on 2  2x4 and lift one to insert a book under each of the 2x4s near the front of the machine.
Using the 2x4 as a lever lift up the back side and insert a book under the rear. Now that your off the ground you can use the 2x4 as a lever to further raise each side adding one book at a time until your levelish with the slot stand and then slide the machine safely over.


Hydraulics are so over rated.... :stirthepot:


** available at Good Will or Sally Ann for $1 each if you don't have a set laying around. :applause:
Title: Re: ON the NEW Stand
Post by: Wzrd0803 on March 09, 2021, 03:09:15 PM
Okay, new issue, bought a new coin comparator and the coins are falling into the Hopper however its not giving me credits, any ideas?


I'm assuming it's a PE+ machine.  Make sure there are no coins stuck in the slide mechanism.  Also, make sure the slide mechanism is to the left and it slides to the right and springs back to the left when you let it go.
SimplePortal 2.3.5 © 2008-2012, SimplePortal