New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: slotdeals on March 11, 2014, 06:55:06 AM

Title: CC 13v coin comparitors
Post by: slotdeals on March 11, 2014, 06:55:06 AM

Just curious if anyone knows a trick to use other coin comparitors in s2000's other than CC 13v

We have a ton of 12v I know they're for Williams and also a lot of straight drops we use to use on S+

Thanks,

Chris

Title: Re: CC 13v coin comparitors
Post by: Blueridgeslots on March 11, 2014, 08:53:40 AM

I know the trick, come buy the 2500+ S-2000 coin handling kits I have...... Hopper, Coin Head, Coin Mech., Optic Bracket with harness..... Bring help to load

Title: Re: CC 13v coin comparitors
Post by: foster on March 18, 2014, 01:14:48 AM

The S2000 requires a coin valid/good signal from the Comparator.
You must have a comparator in the S2000 or something to trigger that coin valid signal. it does not send it when the coin is rejected.
The S+ does not care what goes between its optics as long timing is right
But the S2000 will tilt if a coin goes through the optics when a signal is not received from the comparator - coin in error and it is a hard tilt
Now 1V should not bother the comparator but this is where a running test would let you know.
Make a harness that interfaces between the s2000 comparator connector and the Williams comparator if they are not the same pin outs.
Put it in the machine and let it run for an hour or so, doors closed. compare its temp with a s2000 with s2000 comparator if its not any warmer by feel or by thermometer then you should be okay.