New Life Games LLC
**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: Nepa Coin Op on December 17, 2018, 08:04:08 AM
-
do these board have their own clear chip for the higher clock spd ??
i have a 16 mhz board that wont clear i get up into the 30s then it goes to 8008
after reboot with game rom I have 0 7
obviously its not clearing
thanks
-
I think you have to use a high speed chip for 16mhz boards. Minimum 100ns or faster as I recall. Are you using a SET90 chip to clear?
-
I have always used the the same clear chip as I use for a 10 meg board, HOWEVER, 16 meg boards require a special SP chip, I usually use a 1272.
Jim
-
I think you have to use a high speed chip for 16mhz boards. Minimum 100ns or faster as I recall. Are you using a SET90 chip to clear?
not sure what it is file name is "splusclear" your guess is as good as mine... its worked in the past but i never messed with a 16mhz
-
I think you have to use a high speed chip for 16mhz boards. Minimum 100ns or faster as I recall. Are you using a SET90 chip to clear?
not sure what it is file name is "splusclear" your guess is as good as mine... its worked in the past but i never messed with a 16mhz
Yeah, not an original set chip then. Peel the label back and see what the speed is of the chip, but you should be using a set90 to clear it.
-
Using a 90 still won’t clear
When powered on I get
Win paid 0. 00. Coin play 8
After hitting test
Wp 7. 70. CP 8
Not acting like any of the others I’ve ever done
-
determined that board has issues, ill deal with that another time ....... I have a good 10m board here I put a 1271 and a 6623 in it which should be fine in that and I keep getting a 62-1 I cant get past ......
-
This is what my code sheet says..
-
determined that board has issues, ill deal with that another time ....... I have a good 10m board here I put a 1271 and a 6623 in it which should be fine in that and I keep getting a 62-1 I cant get past ......
I'm only assuming that you're closing the door before turning the reset key?
I didn't see if that was stated?
[62-1] will NOT clear with the door open.