**Reel Slots** Gaming Machines > Aruze Reels Slots

Innovator load graphic data

(1/3) > >>

arnold:
My innovator gets through boot up process and gets to loading graphic data and just reboots and doesn't load. It goes through this process over and over  E erything shows ok
On tests.  Any ideas would be appreciated

Thanks

Slotman:
Something in the graphic files are corrupt.
You may be able to find someone that has a backup file for that game and re-write it to the CF but make sure that the GAL number they have for their backup matches the GAL you have.

What game is it?

arnold:
The game is booster rhino. I also have a howling wolf that says not enough memory. Don't know what memory the error refers to. I had 5 aruze they sat for one year.  I got 3 video ( panda, bison, and dragon) going but not the two reels rhino and wolf.  Am I missing something on reels machines?

Slotman:
The low memory is the DIMM memory sticks.  There should be two of them.
If there isnt two thats the problem, if there is two its possible one is bad and not being seen.

As for the reel machines, there is either 6 or 7 batteries.  The 7th is the little circuit board on the hinged door of the CPU.  Not all machines have that 7th.  If they sat for a year those batteries definitely need to be changed.

Batteries behind the Reels
Battery on the door controller
Battery on the motherboard (the actual ATX motherboard)
Battery on the GMEM card
Battery on the little board on the flip lid (if applicable)

Start with the batteries.  You wont get far without them.
 

arnold:
I replaced 6 batteries including the one on the logic flip down  door.   Am I missing one somewhere?  Two behind reels, two in cpu case (motherboard and memory I think)  one on door, one on logic door.

Thanks

Navigation

[0] Message Index

[#] Next page