Bill Validators, Currency Acceptors and Printers > JCM DBV-45, DBV-145, and DBV-200 Bill Validators |
DBV200 problem in S+ |
(1/1) |
rjpohl:
I've shipped a guy a full DBV200 setup (everything including housing/power supply/head/transport/screws/etc) for a S . I tried the bv head/transport in my test machine before shipping and it worked. It seems to cycle and setup properly (I listened to it over the phone) and it's enabled (9-1). It does not even attempt to pull a bill in. Could this be a bad power supply even though it cycles and sets up? I plan to ship him a power supply but thought I'd ask if anyone has any other thoughts (motherboard/cpu). thanks Bob |
shortrackskater:
Has he checked the "standard" things: Is the bill box seated? Are all doors closed...optics aligned? Check all wiring/plugs? Is the unit seated properly with the latch down? |
Buzz:
http://newlifegames.net/nlg/index.php?topic=4226.msg8620#msg8620 Bob Look at reply 23 |
rjpohl:
--- Quote from: shortrackskater on December 18, 2014, 11:12:41 AM ---Has he checked the "standard" things: Is the bill box seated? Yes Are all doors closed...optics aligned? Yes, it accepts quartes and plays Check all wiring/plugs? Yes Is the unit seated properly with the latch down? Yes --- End quote --- |
rjpohl:
--- Quote from: Buzz on December 18, 2014, 11:20:37 AM ---http://newlifegames.net/nlg/index.php?topic=4226.msg8620#msg8620 Bob Look at reply 23 Thanks Buzz, question will the bv setup if pins aren't bent properly? --- End quote --- |
Navigation |
Message Index |
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |