New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: 61Wally on September 20, 2023, 06:03:49 AM
-
I have various gamemaker boards and I’m try to see if I can move game chips from one board to another. I thought I read a thread back when to look at the last number’s on the “MAINS”. I don’t remember for sure, but I thought if I had a board with (-24) printed at the end of the chip, I could utilize chips that were a lower number like the (-11) type. ALL of these boards have various ending numbers. I would appreciate any help in learning what I can use and what won’t work, so I can do away with. Thank You All for your help. I can post the pictures of the boards if that helps.
-
i use 24s main and graphics they work good on most games , all you should have to do is load up each cpu with chips , clear board , and set that board up to what your machine has , than when you want to change board just put it in and all info stays on that board , just make sure you dont have any credits left on that board if your going to store if because it will drain the battery quick
-
Ok, Thank You So much. One other question, When I use the 24 mains, does it matter which G0,G1 chips I use or should I keep those 4 together?
-
just put the matching set on each board and leave them is what I do.