New Life Games LLC

NLG Classified ads and White Sheet => Requests for PSRs, technical information. => Topic started by: gdgalla on April 26, 2014, 11:25:10 PM

Title: service manual
Post by: gdgalla on April 26, 2014, 11:25:10 PM
Service manual for P & M Coin---5 cent keno---PMK100-UP13---SER. # 40070 Mfg. 8/89
Title: Re: service manual
Post by: SolidSilver on April 27, 2014, 06:01:06 PM
Does that mean you have one for sale, or that you need one?

I have a P&M Coin Keno machine myself, and am looking for a manual.
Is your machine working?
Title: Re: service manual
Post by: gdgalla on April 28, 2014, 08:19:38 PM
No not working, it has been sitting around for a few years. prior to that it worked for awhile and then started to screen scramble.I'm looking for the key now-hoping it is a board battery if I can find it. thanks for the reply.I'm sorry -I just read my 1st post --I'm looking for a manual.
Title: Re: service manual
Post by: SolidSilver on April 28, 2014, 11:02:33 PM
Mine is exactly the same model & date; only difference is mine takes quarters.
And, I have the exact same scrambled screen problem, I think.
See my post titled P&M Coin Keno: this one won't be easy! in the Video Poker
section, the last group "Other Games." I'll bet my photos look like yours.

Notice there is no RAM battery, like most machines; it has a RAM chip with built-in battery.
That may fix the problem, but look for bad components & burn marks on the board, again like
my pictures. I'm sidetracked by a popped monitor, but I'll do what I can to fix yours & mine.

1. Questions: Where are you located? I'm in Portland, Oregon.
2. How comfortable are you with replacing soldered components on your board; any experience?
3. Do I understand you to say you don't have the Reset key, or you don't have the door key to open the machine?
Title: Re: service manual
Post by: SolidSilver on June 05, 2014, 10:05:36 PM
gdgalla, are you still with us?  PM sent last month, no response.

We'd be happy to help in any way, and to hear what progress or plans you have made.
That's what this community is here for.
SimplePortal 2.3.5 © 2008-2012, SimplePortal