New Life Games LLC
**Reel Slots** Gaming Machines => Bally Alpha Reel Games => Topic started by: rickhunter on November 21, 2014, 11:18:06 PM
-
Can an OP Please Sticky this topic.
People are always asking about TITO settings. I'm going to post the Settings for all the platforms I have. Here are the settings on a Bally Alpha. I should point out that these settings
are nearly identical to WMS bluebird 1/2/3 settings as well.
After setting up all your other options (denom, game, machine devices, etc), select "Comm Setup" and then "Protocol Select" (this is using OS 336, in earlier versions, I think it says Serial Ports) as seen in picture #1
You will then see another screen. We are only concerned with Host Com 1, set this to SAS PRIMARY as seen in picture #2. Select Save, then the config letters will turn black as shown on picture #3, select that and you will get what is shown on picture #4. Change the validation to "SYSTEM" as show in Picture #4. Select Save, and if you don't go back to screen #3 select Previous. You should be on picture #3, hit "Device Owner Setup" (On earlier OS, it may read "Device Setup", but the button is in the same place). Hitting the "Device Owner Setup" should take you to screen #5, where you select the options in green as shown. After you have selected the items shown in picture #5, save and then select previous and then exit and you are done.
-
Great Evening to All, I just received my First Bally Alpha “REEL MONEY” machine. I was wondering if I need any key chip/card to set up my printer and TITO? Right now it is setup in “attendant pay” when I hit print ticket button.
-
You need to have a TITO board (a printer is just one piece of the puzzle) and you also need a clear CF card and setup the game from scratch in order to enable ticket acceptance.
-
Thank You, I have a bunch of TITO boards. Do You know which Model machine this is, So I can order the correct CF card? Also, Is this going to be like a S2000, where I set up denomination, printer, bill validator, ETC.
Are the CF cards different for the ALPHA machines models?
-
The clear cards are going to be different depending on which bios chip/Operating system you have. OS is the top CF card behind the right side door of your "engine" the bios is the eeprom on the cpu usually by the 2 batterys when you pull the cpu/engine out.
-
If you go to the NLG File System tab, under Bally alpha.. Look up the matrix and it will show you accordingly as to what BIOS and OS you have and which CLEAR card you need. I usually look in the matrix at what mpu i have and upgrade to the highest BIOS version and buy/upgrade to the newest OS allowed for my MPU.
-
OK, I will research that. I really appreciate Your detailed explanation. Is this machine a Alpha-pro,1,2,S9000?
What should I be using when I’m asked the model, instead of DAH I don’t know!!!
-
You have an alpha 1 S9000 elite.
-
ANOTHER FANTASTIC GROUP OF MEMBERS TO THE HELP!!!
I followed Your instructions and NOW I have a ton of knowledge to research from in this manual. Great instructions, I was able to download it. THANK YOU ALL.