New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Atronic Games => Topic started by: blujezter on January 11, 2019, 05:29:20 PM
-
Hey Guys,
I recently had to do some minor repair work on some Atronic Emotions( kkong cash ) and was not aware that if ram cleared the comm board I would need the alink config cd and interface cord. Does anyone have or know where I can locate at least the alink config cd or program? I think I have a tech drawing of the cord so I can make that my self if I need to.
Any Help would be greatly appreciated!
Blujezter
When in doubt, put it in the microwave.
-
The alink software won't help you unless you have the dongle for the pc to make it work.
-
Do I need the usb dongle even with the serial cord??
-
See attached page from the manual, it goes in the printer port
Here is a pdf of that page
-
:banghead:
Some how I missed that when I was going over the atronic manuals .
Your right.
So Im, going to need to hunt down a whole kit.
If anyone has what I need, please feel free to get in contact.
offers n options are appreciated.