New Life Games LLC

**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: Emt232004 on May 28, 2014, 01:01:34 PM

Title: Bally 6000 handle will not pull
Post by: Emt232004 on May 28, 2014, 01:01:34 PM

Handle was not working when I picked up the machine, I thought it may have been the solenoid but I just replaced the entire assembly with a new one from Raz and it is still not working, is there a way to test it off the machine?

When a credit is added you can feel the handle click, then you can hear another click before the reels spin. I tried reversing the two wired on the solenoid and it is the same thing.

Title: Re: Bally 6000 handle will not pull
Post by: Badbaud on June 15, 2014, 11:41:40 AM

Sounds mechanical. Spray some silicon at the inards.

Title: Re: Bally 6000 handle will not pull
Post by: LINDAM on June 15, 2014, 11:48:18 AM

The solenoid is stuck most likely. located toward the front of the Assy on the bottom. when you find it flick it a few times ...it should free up.