New Life Games LLC

**Reel Slots** Gaming Machines => WMS Reel Games => Topic started by: rwee2000 on November 11, 2021, 02:19:59 PM

Title: WMS Blade error message
Post by: rwee2000 on November 11, 2021, 02:19:59 PM

I have a wms blade and I'm getting the following message after a ram clear. validation ID not host configured. I have matched all the setting to the machine next to it. Any Idead?

Thank to all in advance.

Title: Re: WMS Blade error message
Post by: idesign on November 11, 2021, 03:22:03 PM

Suggest you post a pic of the screen shot

Title: Re: WMS Blade error message
Post by: rwee2000 on November 11, 2021, 03:36:55 PM

As requested

Title: Re: WMS Blade error message
Post by: rickhunter on November 11, 2021, 03:55:19 PM

Do you have a TITO system attached to the machine?  Have you setup SAS on it?

Title: Re: WMS Blade error message
Post by: idesign on November 11, 2021, 04:00:34 PM

Go into the setup menu and select comm, serial ports, Host Comm1 and select SAS Primary and change it to 1 and  pick whichever validation is needed (System or standard) depending upon if you have tito installed, then save it.  Next go to host setup in the middle of the screen and select the options you want.  That should clear that message.