New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Wayout440 on March 29, 2023, 04:46:56 AM
-
Anyone have a source for JCM WBA heads besides EBay? Not expecting new, so used is perfectly fine. Ebay and the like have some but mostly not working/for parts/untested. Trying to find one and keep it under $100. Anything more I'll just live with coins. I have both a flash version transport and a plug in EEPROM version, they light up LEDs on mainboard (two LEDs solid) and the head I have doesn't appear to work. (It has one red LED in the center that is lit, appears to have 3 mag sensors). If I plug and unplug the head repeatedly, occasionally when opening the head the transport motors will reverse for awhile like it is clearing a jammed bill. It just never initializes to take in a bill.
-
What machine are you putting these in?
-
Bally Gamemaker v7200.
Bill validation test mode shows mixed results,
Sometimes no com. Sometime bill jammed, where it subsequently displays status as disabled. Shows stacker open when I remove that. There seems to be some communication with the game, not consistent at all, when using either transport, that is why I'm suspecting the head mostly , that and the fact that I already examined the cable harness, connectors and pins and did not find any problems there.
-
Anyone have a source for JCM WBA heads besides EBay? Not expecting new, so used is perfectly fine. Ebay and the like have some but mostly not working/for parts/untested. Trying to find one and keep it under $100. Anything more I'll just live with coins. I have both a flash version transport and a plug in EEPROM version, they light up LEDs on mainboard (two LEDs solid) and the head I have doesn't appear to work. (It has one red LED in the center that is lit, appears to have 3 mag sensors). If I plug and unplug the head repeatedly, occasionally when opening the head the transport motors will reverse for awhile like it is clearing a jammed bill. It just never initializes to take in a bill.
I have a spare. PM me.