New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: Jimise on January 08, 2015, 06:11:13 PM

Title: 044 cleopatra set up
Post by: Jimise on January 08, 2015, 06:11:13 PM
I am trying to set up a Cleopatra 044 game, and cant get past these errors...
Not sure if I am missing a setting, or it is not compatible with a stand alone machine?
Thanks everyone  :yes:

Title: Re: 044 cleopatra set up
Post by: rickhunter on January 08, 2015, 06:14:57 PM
Your cleo might be a linked progressive program.
Title: Re: 044 cleopatra set up
Post by: GameKingSlots on January 08, 2015, 06:52:46 PM
Can you take a picture of the flashboard?
Title: Re: 044 cleopatra set up
Post by: Jimise on January 08, 2015, 07:32:57 PM
Yup, here is the board.
Can you take a picture of the flashboard?
Title: Re: 044 cleopatra set up
Post by: GameKingSlots on January 08, 2015, 07:53:45 PM
Yup, here is the board.
Can you take a picture of the flashboard?

I know you probably have but try to keychip again.

Are you trying to set up tito?
Title: Re: 044 cleopatra set up
Post by: Jimise on January 08, 2015, 08:09:33 PM
No tito, just trying to install it.
I have keyed it a few times, no go.
Title: Re: 044 cleopatra set up
Post by: Harp on January 09, 2015, 03:31:31 AM
Which version KeyChip did you use

The picture shows that the game was configured for use with a System, and also tells me that you did not perform a Full Clear when you used your KeyChip
Title: Re: 044 cleopatra set up
Post by: Jimise on January 09, 2015, 07:16:29 PM
I have a key 28.
This is the first time I have installed this game.
normally I just clear the machine, install a game, set it up, no problem.
Title: Re: 044 cleopatra set up
Post by: Harp on January 10, 2015, 04:20:18 AM
I would suggest using your 28 again

Perform a complete clear, RAM, EEPRom and Keychip, set the game and options as per your requirement

SimplePortal 2.3.5 © 2008-2012, SimplePortal