New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: 535bibjeep on April 14, 2018, 02:36:26 PM
-
my s2000 backlight reels don't work for some reason do I need another harness to get them to work all bulbs work ok
-
It appears you need the harness from the backlight controller to the port on the cabinet IO card
-
We really can't see the harnesses that are in the machine. Can you post better pictures?
-
We really can't see the harnesses that are in the machine. Can you post better pictures?
here some better pictures
-
With the power turned off .. plug in the 6 pin connector (4 wires) in the top left of your first picture. That is the power to the controller.
-
We really can't see the harnesses that are in the machine. Can you post better pictures?
here are some better pictures
-
It appears you need the harness from the backlight controller to the port on the cabinet IO card
-
Unplug the printer harness from the backlight controller (yellow). Plug in the power connector (green). Plug in the 14 pin connector from the reel harness (orange).
-
Unplug the printer harness from the backlight controller (yellow). Plug in the power connector (green). Plug in the 14 pin connector from the reel harness (orange).
OK NOW WHAT ABOUT MY PRINTER NOW HOW CAN I GET MY PRINTER TO HOOK UP
-
It plugs into the harness that you had connected to the backlight controller. Be sure your machine is turned off before connecting it.
-
What do you have plugged in here (yellow)? Maybe I'm mistaken but it doesn't look like the reel harness. What happened to the harness that goes from the cabinet I/O to the controller (orange)? It was present in your earlier pics.
-
It plugs into the harness that you had connected to the backlight controller. Be sure your machine is turned off before connecting it.
OK THAT WAS THE HARNESS THAT WAS CONECTED TO PRINTER
WILL THE BACK LIGHT REELS STILL WORK IF I HOOKED IN THE PRINTER
-
What do you have plugged in here (yellow)? Maybe I'm mistaken but it doesn't look like the reel harness. What happened to the harness that goes from the cabinet I/O to the controller (orange)? It was present in your earlier pics.
I MUST OF DISCONECTED
THE 14 PIN CONECTOR WHAT GOES IN THERE WILL THE LIGHTED REELS STILL WORK
-
I don't know who is doing what here. Some posts are by 535bibjeep. Some by fordf1502003. Are we all working on the same machine here? The 14 pin connector from the reel harness goes there. If there is not one you may not have the correct reel harness. The printer harness in the cabinet goes to the printer harness on the printer itself and in no way, shape or form ever connects to the backlight controller.
-
Ron, sounds like a typical "Buzz" response, sure do miss his direct reply's.
Jim