**Video Poker, Keno, Slots, 21** Gaming machines => IGT I-Game and Game King => Topic started by: Tilt on February 16, 2014, 01:31:32 PM
Title: IGT Game King 1493 Monitor Interference
Post by: Tilt on February 16, 2014, 01:31:32 PM
picked up a dozen or so game kings, 4.3 programs. concerned that the monitors all ceronix 1493's run on 230 volt current. -is this the normal for them to operate on 230 volt, a bit of slight interference on the screens but ok pics, without doing a complete recap, what caps would i replace on them to give them a good crisp picture?
azgamingslots
« Reply #1 on: December 02, 2011, 04:01:55 AM »
i found that replacing c-50 cap on the game main board (100uf 35v) cleans up alot of interference on the monitor. azgamingslots
« Reply #2 on: December 02, 2011, 03:01:55 PM »
Thanks for taking the time to post your solution -- this could very well help someone in the future. K+ to you.