New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => Pot-O-Gold => Topic started by: jake511511 on February 22, 2020, 12:40:57 PM

Title: Pot Of Gold
Post by: jake511511 on February 22, 2020, 12:40:57 PM
My pot of gold machine has this on the screen can someone help me fix the problem ......thank you all
Title: Re: Pot Of Gold
Post by: Stayouttadabunker on February 22, 2020, 03:51:35 PM
What did you do to it?
Did you change anything?
Give us some history and some photos of the dip switches.
Title: Re: Pot Of Gold
Post by: jake511511 on February 22, 2020, 03:55:19 PM
Haven't done anything it was working great then this popped up on the screen
Title: Re: Pot Of Gold
Post by: Stayouttadabunker on February 22, 2020, 03:58:07 PM
Show us a picture of the board, dip switches, and the power supply.
Title: Re: Pot Of Gold
Post by: jake511511 on February 22, 2020, 08:10:59 PM
Here are more pics the board is a 371_C
Title: Re: Pot Of Gold
Post by: asgard on April 28, 2020, 10:28:53 AM
Try turning the "attendant" key switch and hold it in position for 5 seconds (pin 18 parts side). If that doesn't clear it you have to manually reset the board by removing the clock chip for about 30 seconds while machine is powered OFF. The clock chip would be the U3 chip on newer model boards but in your pic I see your board is an older model, I don't know what socket the clock chip is on those, I need a better pic.
Title: Re: Pot Of Gold
Post by: samharris777 on February 16, 2021, 12:35:36 PM
yes what asgard (http://newlifegames.com/nlg/index.php?action=profile;u=2025) said ^^^^


hold the attendant key for about 3 seconds it should work
Title: Re: Pot Of Gold
Post by: Sever12c on January 24, 2023, 09:25:10 PM
It’s either set on South Carolina redemption or Georgia redemption or you have hit the disable terminal button in the main configuration screen. Look for The redemption or payout buttons on the main configurations Green and make sure they are set to generic or generic hand pay. If it is set to SC redeem or GA redeem it will do that also. Also remember to raise the number eight DIP switch on the board and I also have the supervisor switch and in the on position
SimplePortal 2.3.5 © 2008-2012, SimplePortal